| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Drivetrain | Section: Automatic Transmission/Transaxle | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003F71000X |
| Title: AB60E AUTOMATIC TRANSMISSION / TRANSAXLE: OIL COOLER: REMOVAL (2008 Sequoia) | ||
REMOVAL
1. DRAIN ENGINE COOLANT
2. REMOVE FRONT EXHAUST PIPE ASSEMBLY
3. DISCONNECT WATER BY-PASS PIPE ASSEMBLY
|
(a) Remove the bolt and disconnect the 2 water by-pass hoses from the transmission oil cooler. Then separate the by-pass pipe from the automatic transmission. HINT:
Use a container to catch any coolant which flows out of the water by-pass hoses. |
4. REMOVE TRANSMISSION OIL COOLER ASSEMBLY (w/o Trailer Towing System)
|
(a) Remove the 3 bolts and transmission oil cooler with transmission oil cooler spacer. |
(b) Separate the transmission oil cooler from the transmission oil cooler spacer.
(c) Remove the 4 O-rings.
5. REMOVE TRANSMISSION OIL COOLER ASSEMBLY (w/ Trailer Towing System)
|
(a) Disconnect the 2 No. 2 transmission oil cooler hoses from the transmission oil thermostat. |
|
(b) Remove the 3 bolts and transmission oil cooler with transmission oil thermostat. |
(c) Separate the oil cooler from the transmission oil thermostat.
(d) Remove the 4 O-rings.
|
|